Claas AXION 870 CMATIC wheel tractor
≈ US$178,800
Kaunas
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Lithuania 
Lithuania, Kaunas
Lithuania, Kaunas
Lithuania, Kaunas
Lithuania, Kaunas
Lithuania, Kaunas
Lithuania, Babtų sen.
Lithuania, Babtų sen.
Lithuania, Kaunas
Lithuania, Mažeikiai
Lithuania, Panevėžys
Lithuania, Kužiai
Lithuania, Saviečiai
Lithuania, Panevėžys
ZWL 15,500,000
€42,000
≈ US$48,460
Lithuania, Vilnius
Lithuania, Šilalė
Lithuania, Panevėžys
Lithuania, Babtų sen.
10,930 kg
Lithuania, Babtai
The tractor is equipped with a continuously variable CMATIC transmission, CLAAS CEMIS 1200 automatic steering system with RTK correction signal, front linkage and an extensive range of optional equipment. Valid manufacturer warranty
Valid international manufacturer warranty up to 1000 motohours, after it the warranty time can be easily extended.
Operating hours: 736 h
Technical specifications:
▪ Rated power: 209 kW / 284 hp
▪ Maximum power: 221 kW / 300 hp
▪ Engine: FPT, 6-cylinder
▪ Engine displacement: 6,728 cm³
▪ Rated engine speed: 2,150 rpm
▪ Maximum power range: 1,650–2,150 rpm
▪ Maximum torque range: 1,150–1,650 rpm
▪ Emissions standard: Stage V
▪ Transmission: CMATIC continuously variable transmission
▪ Maximum travel speed: 50 km/h
▪ Hydraulic pump capacity: 205 l/min
▪ Hydraulic system: closed-centre load-sensing system
▪ Front linkage lift capacity: 5.8 t
▪ Rear PTO speeds: 540 ECO, 1,000 ECO and 1,000 rpm
▪ Front PTO
▪ Battery: 12 V / 235 Ah
▪ Front tyres: 600/70 R30 Trelleborg
▪ Rear tyres: 710/70 R42 Trelleborg
Equipment:
Engine and transmission
▪ 220 V electric engine pre-heater
▪ Standard vertical exhaust pipe alongside the cab
▪ Additional fuel filter with heater
▪ Electric battery master switch
▪ Air compressor
▪ Additional Park Lock parking brake
▪ Bolt-on 1⅜" PTO stub shafts with 6 and 21 splines
Cab and comfort equipment
▪ Spacious cab with four-point suspension
▪ Adjustable steering column
▪ Dynamic Steering variable-ratio steering system
▪ Leather steering wheel
▪ Grammer DUAL Motion air-suspended, swivel and ventilated driver’s seat
▪ Passenger seat
▪ Automatic climate control
▪ MP3 radio with Bluetooth connectivity
▪ Monitor mounting rail
▪ Rear-view camera
▪ Rear window wiper
▪ Tinted rear window
▪ Cab roof without roof hatch
▪ Two electrically adjustable exterior rear-view mirrors
▪ Interior rear-view mirror
▪ Rear linkage mirror
▪ Electrical sockets: 3 × 25 A, 2 × 12 V and 7-pin ISO socket
▪ Pull-out CLAAS toolbox beneath the cab
Control and precision farming systems
▪ CEBIS information and control system
▪ Headland management system
▪ Rear ISOBUS connection
▪ CLAAS CEMIS 1200 automatic steering system
▪ RTK correction signal
▪ Section Control activation
▪ Variable Rate Application activation
▪ Ground-speed radar for measuring actual travel speed
Hydraulics and implement control
▪ Five electronically controlled double-acting hydraulic spool valves, operated via CEBIS
▪ Free-flow hydraulic return
▪ Front linkage with a lifting capacity of 5.8 t
▪ Front PTO
▪ One pair of front hydraulic couplers
▪ Electronic front linkage position control
▪ Hydraulically adjustable top link
▪ Sliding and mechanically lockable trailer and implement hitch
▪ Automatic stabilisers for the rear linkage lower links
▪ External rear PTO controls on both rear mudguards
Chassis and braking systems
▪ PROACTIV suspended front axle
▪ Dual-line pneumatic trailer braking system
▪ Hydraulic trailer braking system
▪ 620 mm pivoting front mudguards
▪ Rear mudguard extensions for an overall width of up to 2.75 m
Lighting
▪ PREMIUM LED work light package:
– 2 work lights at the front of the bonnet
– 6 work lights at the front of the cab
– 6 work lights at the rear of the cab
▪ LED work lights on the rear mudguards
▪ 2 rotating beacons
The tractor can be inspected at our machinery yard in Kaunas, Lithuania:
Perspektyvos St. 32, Kaunas, Lithuania.